Chalkboard How-To

This week i worked on 2 pieces for our Environments team. I had actually made one very similar for them last week but on paper so they asked me to recreate it on chalkboards. I thought I would have fun with the project and make a time lapse.

Materials List

Chalkboard How To
make animated gifs like this at MakeaGif
  1. Sketch paper & Pencil
  2. Chalkboard or Corkboard
  3. Chalk (I use Crayola chalk)
  4. Chalkboard paint
  5. Multi surface acrylic paint
  6. Washi tape
  7. Brushes - any would work!
  8. Paper towels
  9. Chalk Marker (wipes off)
  10. Paint Marker (more permanent)

Process

Step 1: Paper Draft 

This is where you can play around with placement before spending time on the board.

Step 2: Paint the Board

If the chalkboard is new, then there is no need to paint. If its had chalk on it before, you will notice it never really gets clean. This piece was actually a cork board so a cork board shouldn't give you any problems. Just try a few coats for cork board! Note: make sure you save some time for it to dry!

Step 3: Layout the Basic Structure

I like to use Washi tape to lay out a basic structure because it keeps my lines straight and it wont stick to the board too much.

Step 4: Simple Chalk Outline

This should be a super simple outline and it should be done with a very light hand just to have something to direct you.

Step 5: Go over Chalk Outline with Chalk Pen or Paint Pen

If you want to make a simple sign that you want to be able to wipe off at some point, then you can use a chalk pen. Note: chalk pens are also great on glass/mirrors, etc.! Make sure to do this with a steady hand.

vsco-photo-5.jpg

Step 6: Double the Downstrokes

To get this "look" of the thick and thin letters, you need to double all of the downstrokes. So, if you are writing a "J" the trunk down would be thick and the little loop up wouldn't be. Neither would the stick across if you put it at the top. After this, I wipe off the chalk so it's easier to concentrate. Note: if you're using a chalk marker, wiping it at this point will WIPE IT OFF so you either have to write with the chalk super neat or, wipe around the letters as not too smudge the ink.

Step 7: Paint in the Downstrokes

You can do this with the chalk pen or paint pen as if you were coloring with a marker but I usually go with a paint so it's more vibrant.

Step 8: The Clean Up

Once the paint dries, I go over the edges just to make sure everything is straight and smooth.

The Final Product

I hope you enjoyed this How-To! Please let me know if you would like me to create a How-To for anything else!

Recent Logo and Design Work

Recently, I've been asked more and more to design t-shirts, logos, etc. They have been so much fun! Below are a few of my favorite pieces I have worked on and pieces I am currently working on.

1. T-Shirt design for the Blink Conference. Tash from Ike&Tash contacted me a few months ago to collaborate on this piece. I was floored. They are an amazing duo and I couldn't believe they would think of me to co-lab. This piece was so much fun to work on! Digitized by the amazing Loreni Cespedes.

2. Another co-lab with Ike&Tash for G.L.A.M. Camp . This is just a rough sketch so far and I'm waiting for approval to digitize. Can't wait to see the final product!

3. This is a funny story actually. A few weeks ago Alexis June Weddings contacted me for a piece of a logo design. I worked on a bunch of different options for approval just to then realize that it was supposed to say "develop"! Haha! Lesson of the night, read and re-read all instructions.

I can't wait to share final pieces with you!

Floral card making

I've been experimenting with my card making lately and decided just to go for it tonight - no templates, just a pencil, paper and my craft knife! Tonight I decided to go with a little floral pattern. 

Materials

  • Cardstock paper - 2 colors
  • envelope 
  • pencil
  • craftknife
  • metal ruler
  • glue stick

 

Process

  1. Measure the cardstock against the envelope to make sure it would fit inside
  2. Measure 1 inch around the border which is where I'd have the freedom to create
  3. Start drawing flower patterns in that 1 inch border
  4. Carefully cut around them using the craftknife
  5. glue the contrasting cardstock in the middle